ar0717l1060va

Remove/install pressure control valve

Typ ar · temat 07.17 · wersja 0100 · 2009-01-29

Dotyczy: ENGINE 668.914 in MODEL 414.700

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.17 Przetwornik ciśnienia, regulator ciśnienia — Seria 414 (modele 700) · Seria 668 (modele 914)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.13 Przewód sztywny/elastyczny/zawór — Seria 414 (modele 700) · Seria 668 (modele 914)

AR07.17-L-1060VA

Remove/install pressure control valve

8.1.09

ENGINE 668.914 in MODEL 414.700

Remove/install pressure control valve

P07.16-0296-12

1 Plug connection of pressure regulator valve

2 Sealing ring

3 Sealing ring

4 Screw

Y74 Pressure control valve

Removing

1

Disconnect plug connection for pressure regulating valve (1)

Installation: Ensure correct seating of the pressure regulating valve connector (1).

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

2

Unscrew bolts (4) and remove pressure control valve (Y74)

Collect fuel which runs out in a suitable container.

Install

3

Clean sealing surfaces

4

Lightly grease new seals (2 and 3) with special grease before installing pressure regulator valve

If the seals are damaged when being installed, this may result in internal leaks which are not recognizable from the outside.

*BR00.45-Z-1036-06A

5

Insert pressure control valve (Y74) and screw in bolts (4)

Bolt pressure regulator valve tight in stages.

*BA07.16-P-1002-01B

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check fuel system for leaks with engine running

Common rail diesel injection (CDI)

Number

Designation

Engine 668.914

BA07.16-P-1002-01B

Bolt connecting pressure regulator valve to rail

Stage 1

Nm

3

Stage 2

Nm

5

Repair materials

Number

Designation

Order number

BR00.45-Z-1036-06A

Special grease

A 001 989 42 51 10

Powiązane dokumenty