ar0715g1629dd

Perform precise parameterization of engine control unit (MR/PLD)

Typ ar · temat 07.15 · wersja 0100 · 2019-10-04

Dotyczy: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.15 Wysokoprężny układ wtryskowy (PLD), układ sterowania pracą silnika (MR) — Seria 000 (modele 001) · Seria 900 (modele 91*, 92*) · Seria 902 (modele 91*, 93*) · Seria 904 (modele 94*, 95*, 96*, 97*) · Seria 906 (modele 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.11 Moduł sterujący/ przekaźnik — Seria 000 (modele 001) · Seria 900 (modele 91*, 92*) · Seria 902 (modele 91*, 93*) · Seria 904 (modele 94*, 95*, 96*, 97*) · Seria 906 (modele 93*, 94*, 95*, 96*, 98*, 99*)

Dotyczy też silników/skrzyń biegów: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*

AR07.15-G-1629DD

Perform precise parameterization of engine control unit (MR/PLD)

23.08.2019

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

Perform precise parameterization of engine control unit (MR/PLD)

Displayed picture is only one example

G07.15-A004-04

Notes on the precision parameterization of the engine control unit (MR/PLD)

AH07.15-N-1000-01A

Parameterization

1

Switch on ignition.

See information from body manufacturer.

2

Connect diagnostic unit.

See information from body manufacturer.
The fine parameterization on the MR/PLD control unit can be performed only with the diagnostic device and a chip card.

3

Insert chip card, switch on diagnostic device, and select engine model designation.

See information from body manufacturer.

4

Select special functions.

5

Select EOL module for performance correction and confirm with "yes".

6

In the "Functions" menu, select the menu item "Parameterization" and confirm with the ENTER key.

7

In the "PLD/MR parameterization" menu, change the equipment code.

If the engine output is outside of the output tolerance, the engine output can be set to the output tolerance at various engine speeds through fine parameterization of the MR/PLD control unit.

Powiązane dokumenty