ar0708s1003eh

Remove/install bracket for diesel injection system control unit

Typ ar · temat 07.08 · wersja 0100 · 2019-09-17

Dotyczy: Engine 622.8 in model 447

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.08 Moduły sterujące — Seria 447 · Seria 622 (modele 8**)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.11 Moduł sterujący/ przekaźnik — Seria 447 · Seria 622 (modele 8**)

AR07.08-S-1003EH

Remove/install bracket for diesel injection system control unit

02.09.2019

Engine

622.8 in model 447

Remove/install bracket for diesel injection system control unit

S07.08-A050-79

1

Screw

4

Bracket for the diesel injection system control unit

2

Nuts

5

Electrical wiring harness

3

Electrical connectors

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove CDI control unit (N3/36).

AR07.08-S-7011EH

2

Release and disconnect electrical connectors (3) and place to one side.


Do not crush or kink or subject lines to tension.
This would lead to damage to the lines and can impair their function.

3

Unclip electrical wiring harness (5) from the bracket for the diesel injection system control unit (4) and place to one side.


Do not crush or kink or subject lines to tension.
This would lead to damage to the lines and can impair their function.

4

Remove screw/bolt (1).

5

Remove nuts (2).

6

Remove bracket for the diesel injection system control unit (4).

7

Install in the reverse order.

Powiązane dokumenty