1 | ME-SFI [ME] control unit |
2 | Electrical wiring harness |
3 | Electrical connections |
P07.08-2254-06
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Read out variant coding of the ME-SFI [ME] control unit (1) with the diagnostic system | ||
| |||
Connect up diagnostic system and read data from ME-SFI [ME] control unit (1) in diagnostic system. | |||
Installation: Transfer stored data to new ME-SFI [ME] control unit (1). | |||
2 | Switch off ignition and remove transmitter key | ||
3 | Open engine hood | ||
4 | Unclip electrical wiring harness (2) on ME-SFI [ME] control unit (1) bracket | ||
5 | Disconnect electrical connections (3) on ME-SFI [ME] control unit (1) | ||
6 | Unclip ME-SFI [ME] control unit (1) upwards and take it off | ||
7 | Detach bracket from ME-SFI [ME] control unit (1) | When replacing the ME-SFI [ME] control unit (1) | |
8 | Install in the reverse order | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Carry out an engine test run |
Powiązane dokumenty
- ad0000p200004b Podłączanie STAR DIAGNOSIS, odczytywanie pamięci usterek
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar8840p1000rg
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.