AR07.08-D-7008NB | Remove/install injection system control unit | 18.8.03 |
ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
D07.08-1102-05
1 CDI control unit
2 Connector
3 Connector
| Remove/Install | ||
1 | Pull CDI control unit (1) down at the plug side until it releases | The CDI control unit (1) is located below the left knee protection next to the steering column. Installation: Pay attention to correct latching of the CDI control unit (1) in the clamping springs. | |
2 | Unplug plug sockets (2, 3) at CDI control unit (1) | Pull out locking clamp at plug sockets (2, 3) to the side. First unplug the plug socket (2), as this can block the plug socket (3) | |
3 | Take CDI control unit (1) toward front out of bracket | ||
4 | Install in the reverse order |