1 | Screw |
2 | Electrical connector |
3 | Air intake pipe |
4 | Screw |
B2/16 | Hot film mass air flow sensor |
S07.07-4514-06
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove screw/bolts (1) from intake air duct | ||
2 | Disconnect electrical connection (2) | ||
3 | Remove air intake pipe (3) | Installation: Check clamp, replace as per findings. | |
4 | Remove hot film MAF sensor (B2/16) with intake air duct | ||
5 | Remove hot film MAF sensor (B2/16) from intake air duct | For this purpose, remove bolts (4). | |
Installation: Check sealing rings; replace as per findings. | |||
6 | Install in the reverse order | ||
7 | Perform initialization of the hot film mass air flow sensor (B2/16) with diagnostic system | When replacing the hot film MAF sensor (B2/16). | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Check for leak tightness with engine running | Visual inspection only. |
Powiązane dokumenty
- ad0000s200004e
- ah0000p500001a Wskazówki dotyczące zapobiegania uszkodzeniom na skutek zabrudzeń i ciał obcych
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.