AR07.07-D-1453NA | Remove/install hot film mass air flow sensor | 9.3.10 |
ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
D07.07-1106-06
1 Hot film MAF sensor
2 Connector
3 Air intake hose
4 Air filter
5 Screw
6 Hose clamp
| Remove/install | ||
1 | Detach air intake hose (3) at hot film mass air flow sensor (1) | Installation: Check hose clamp (6), replace if necessary. | |
2 | Unplug plug (2) at hot film mass air flow sensor (1) | ||
3 | Unscrew bolts (5) at hot film mass air flow sensor (1) | ||
4 | Pull hot film mass air flow sensor (1) out of air cleaner (4) | Installation: Replace sealing ring of hot film mass air flow sensor (1) and coat with lubricant. | |
5 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1002-06A | Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00 | A 000 989 01 60 |