ar0704s0005ef

Remove/install diesel particulate filter temperature sensor

Typ ar · temat 07.04 · wersja 0102 · 2019-08-29

Dotyczy: Model 447 with engine 622

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.04 Czujniki — Seria 447 · Seria 622

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 622

AR07.04-S-0005EF

Remove/install diesel particulate filter temperature sensor

14.08.2019

Model

447 with engine 622

Remove/install diesel particulate filter temperature sensor

Shown on engine 622.9

1

Electrical connector

2

Electrical wiring harness

3

Union nut

B19/27

Temperature sensor upstream of diesel particulate filter

S07.04-4588-06

Remove/install diesel particulate filter temperature sensor

Shown on engine 622.8

1

Electrical connector

2

Electrical wiring harness

3

Union nut

B19/27

Temperature sensor upstream of diesel particulate filter

S07.04-A062-76

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Release, disconnect electrical connector (1) and expose electrical wiring harness (2).

Model 447 with engine 622.8

Installation: Ensure correct installation position.

2

Raise vehicle.

AR00.60-S-1000E

3

Release, disconnect electrical connector (1) and expose electrical wiring harness (2).

Model 447 with engine 622.9

Installation: Ensure correct installation position.

4

Remove union nut (3).

Installation: Coat thread at diesel particulate filter with heat-resistant lubricating paste.

Temperature sensor to particulate filter

*BA07.04-N-1004-01M

Paste, hot lubrication 1 kg, DBL 6879.20

*BR00.45-Z-1005-06A

5

Remove temperature sensor upstream of diesel particulate filter (B19/27).

6

Install in the reverse order.

Check

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out an engine test run; check engine for leak tightness while doing so.

Sensors

Number

Designation

Engine 622 in model 447

BA07.04-N-1004-01M

Temperature sensor to particulate filter

Nm

32

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DBL 6879.20

A 000 989 76 51

Powiązane dokumenty