ar0704d0053tsv

Remove/install position sensor of right cylinder bank intake camshaft

Typ ar · temat 07.04 · wersja 0100 · 2018-01-10

Dotyczy: Engine 642 in model 907

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.04 Czujniki — Seria 907

EinPAS 15 Silnik › 15.17 Rozrząd silnika › 15.17.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 907

Dotyczy też silników/skrzyń biegów: 642 ***

AR07.04-D-0053TSV

Remove/install position sensor of right cylinder bank intake camshaft

11.12.2017

Engine

642 in model 907

Remove/install position sensor of right cylinder bank intake camshaft

1

Position sensor

2

Electrical connector

3

Screw

D07.04-1235-06

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove trim panel on right cylinder head cover

AR01.20-D-5017TSV

Installation: Install cover only after a leak test.

2

Disconnect electrical connection (2)

3

Remove screw/bolt (3)

Screw/bolt, camshaft position sensor to cylinder head cover

*BA07.04-N-1002-02TSV

4

Remove position sensor (1)

Installation: Check sealing ring for damage.

Depending on findings

Replace damaged sealing ring.

5

Install in the reverse order

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness with engine running

Visual inspection only.

Sensors

Number

Designation

Engine 642 in model 907

BA07.04-N-1002-02TSV

Screw/bolt, camshaft position sensor to cylinder head cover

Nm

8

Powiązane dokumenty