ar0704d0030na

Remove/install fuel pressure sensor

Typ ar · temat 07.04 · wersja 0103 · 2002-09-24

Dotyczy: ENGINE 611.983 in MODEL 690.6 ENGINE 612.981 in MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741, WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741, WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741 ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) Country version "Canada" ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) Country version "USA" ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU9) Country ve

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.04 Czujniki — Seria 611 (modele 983) · Seria 690 (modele 6**) · Seria 903 (modele 61*, 66*, 67*) · Seria 904 (modele 61*, 66*)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 611 (modele 983) · Seria 690 (modele 6**) · Seria 903 (modele 61*, 66*, 67*) · Seria 904 (modele 61*, 66*)

Dotyczy też silników/skrzyń biegów: 612 981

AR07.04-D-0030NA

Remove/install fuel pressure sensor

29.1.01

ENGINE 611.983 in MODEL 690.6

ENGINE 612.981
in MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741,
WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741,
WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) Country version "Canada"

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) Country version "USA"

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU9) Country version "Mexico"

Remove/install fuel pressure sensor

D07.04-1119-05

Shown on Engine 612

1 Fuel pressure sensor

2 Sealing ring

3 Connector

4 Housing

5 Screw

Remove, Install

Danger!

Risk of explosion if ignition takes place, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel.

Fire, sparks, open flames or smoking forbidden.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Unplug connector (3) at fuel pressure sensor (1)

2

Unbolt fuel pressure sensor (1) from housing (4) and take off together with seal (2)

When the fuel pressure sensor (1) is slackened, the housing (4) detaches, for this reason, after installing, tighten bolt (5).

Installation: Install new sealing ring (2).

3

Install in the reverse order

Danger!

Risk of accident from vehicle starting off by itself when engine running. Risk of injury suffered in the form of bruises or burns to the hands when reaching in while the engine cranks or runs

Secure vehicle to prevent it from moving off by itself.
Wear closed and close-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

4

Check tightness of fuel system

Run engine, switch off and inspect for leaks.

Powiązane dokumenty