Remove/install camshaft position sensor · ar0704d0011na · Mercedes-Benz WIS

AR07.04-D-0011NA

Remove/install camshaft position sensor

15.1.01

ENGINE 612.981
in MODEL WD1XD141, WD1XD241, WD1XD341, WD1XD441, WD1XD541, WD1XD641, WD1XD741,
WD2YD141, WD2YD241, WD2YD341, WD2YD441, WD2YD541, WD2YD641, WD2YD741,
WD5WD141, WD5WD241, WD5WD341, WD5WD641, WD5WD741

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) Country version "Canada"

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) Country version "USA"

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU9) Country version "Mexico"

D07.04-1118-05

1 Camshaft position sensor

2 Connector

3 Seal

 	Removing, installing
1	Remove trim panel of cylinder head cover		AR01.20-D-5015NA
2	Unplug connector (2) at camshaft position sensor (1)
3	Detach camshaft position sensor (1) at cylinder head cover and pull out	 Installation: Replace sealing ring (3).
			*BA07.04-N-1002-01B
4	Install in the reverse order

 Sensors

Number	Designation		Engine 612.981


BA07.04-N-1002-01B	Bolt of camshaft position sensor to cylinder head cover	Nm	11

Powiązane dokumenty

ar0120d5015na