2 | Electrical connection |
B60 | Exhaust back pressure sensor |
D07.04-1208-05
| Remove/install | ||
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
1 | Open engine hood | ||
2 | Disconnect electrical connection (2) from exhaust back pressure sensor (B60) | ||
3 | Remove exhaust back pressure sensor (B60) | Installation: Replace sealing ring. Coat thread with paste. | |
Paste, hot lubrication 1 kg, DB supply specification 6879.20 | |||
Pressure sensor on charge air manifold | |||
4 | Install in the reverse order | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Perform an engine test run and check charge air distributor in the area of exhaust back pressure sensor (B60) for leaktightness |
Powiązane dokumenty
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.