ar0703s6522pb

Remove/install injection valves

Typ ar · temat 07.03 · wersja 0100 · 2017-09-07

Dotyczy: Engine 200 in model 470

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.03 Wtryskiwacze, zawory wtryskiwaczy — Seria 470

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.42 Rozdzielacz paliwa/kolektor rozprowadzający paliwo/dysza/wtryskiwacz — Seria 470

Dotyczy też silników/skrzyń biegów: 200 ***

AR07.03-S-6522PB

Remove/install injection valves

12.04.2017

Engine

200 in model 470

Remove/install injection valves

1

Fuel distributor

7

Injection valves

8

Retaining clips

9

Sealing rings

S07.03-4553-06

Remove/install injection valves

7

Injector

9

Sealing ring

10

Sealing ring

S07.03-4552-02

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove fuel distributor (1) with injection valves (7)

AR07.03-S-1450PB

2

Release retaining clips (8)

3

Remove injection valves (7)

Installation: Always replace sealing rings (9, 10).

4

Convert retaining clips (8) to new injection valves (7)

When replacing injection valves (7).

5

Install in the reverse order

Powiązane dokumenty