ar0703s6522b

Removing and installing injection valves

Typ ar · temat 07.03 · wersja 0103 · 1999-08-05

Dotyczy: ENGINE 104.900 in MODEL 638.2

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.03 Wtryskiwacze, zawory wtryskiwaczy — Seria 638 (modele 2**)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.42 Rozdzielacz paliwa/kolektor rozprowadzający paliwo/dysza/wtryskiwacz — Seria 638 (modele 2**)

Dotyczy też silników/skrzyń biegów: 104 900

AR07.03-S-6522B

Removing and installing injection valves

28.5.97

ENGINE 104.900 in MODEL 638.2

Removing and installing injection valves

S07.50-2501-06

1 Intake manifold

2 Connector

3 Bolt

4 Injection nozzle holder

5 Injection nozzle

6 Seals

7 Gasket

Removing, installing

Danger!

Risk of explosion from ignition. Risk of poisoning from inhaling and swallowing fuel. Risk of injury as a result of fuel coming into contact with skin and eyes.

No fire, naked flame or smoking.

Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove intake manifold (1)

AR09.20-S-1310C

2

Unplug connector (2) of injection nozzles

3

Take off bolts (3) attaching injection nozzle holder (4) at intake manifold (1)

*BA07.51-N-1007-01A

4

Take off injection nozzle holder (4)

Do not damage injection nozzles (5).

5

Take injection nozzles (5) out of injection nozzle holder

Installation: replace seals (6).

6

Install in the reverse order

Inspecting

7

Inspect injection nozzles (5) for leaks

HFM-SFI fuel injection and ignition system

Number

Designation

Engine 104.900

BA07.51-N-1007-01A

Bolt of injection nozzle holder to intake manifold

Nm

23

Powiązane dokumenty