1 | Rail |
2 | Fuel return line |
3 | Screw |
B4/6 | Rail pressure sensor |
Y74 | Pressure regulator valve |
P07.16-3295-11
| Remove/install | ||
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Notes about Common-Rail components | |||
1 | Lower rear drive module | ||
2 | Lower vehicle with vehicle lift | ||
3 | Remove injection lines of the fuel injectors | ||
4 | Remove pressure line from the high-pressure pump to the rail (1) | ||
5 | Remove fuel return line (2) from rail (1) | Installation: Install new clamp of the fuel return line (2). | |
Pliers | |||
6 | Remove screws (3), remove rail (1) and disconnect electrical connectors from the rail pressure sensor (B4/6) and from the pressure regulating valve (Y74) | Bolt, rail to charge air manifold | |
7 | Install in the reverse order | ||
8 | Read out fault memory; clear if necessary | ||
|
450 589 06 37 00
Pliers
Powiązane dokumenty
- ad0000p200004mcc
- ah0716p000201tx Wskazówki dotyczące zespołów układu Common-Rail
- ar0100p3050mcc
- ar0703p7000mcd
- ar0716p1080mcd
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.