ar0703p0003mcd

Remove/install quantity control valve

Typ ar · temat 07.03 · wersja 0104 · 2019-04-30

Dotyczy: Engine 660.9 in model 451.3/4

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.03 Wtryskiwacze, zawory wtryskiwaczy — Seria 451 (modele 3**, 4**) · Seria 660 (modele 9**)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.13 Przewód sztywny/elastyczny/zawór — Seria 451 (modele 3**, 4**) · Seria 660 (modele 9**)

AR07.03-P-0003MCD

Remove/install quantity control valve

18.04.2019

Engine

660.9 in model 451.3/4

Remove/install quantity control valve

P07.03-2218-08

1

High pressure pump

3

Electrical connector

Y94

Quantity control valve

2

Bolts

Remove/install

Danger

Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.
Do not carry out any work on system when it is pressurized.

AS07.16-Z-0001-01A

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Notes about Common-Rail components

AH07.16-P-0002-01TX

1

Move front seats forward and fold seat backrests forwards

2

Remove interior flap above engine

AR88.40-P-1100-03MCC

Fold floor covering forward onto seat backrests of front seats.

Installation: Only install interior flap over engine after leak test.

3

Get into vehicle and unscrew screws (2)

Bolt, quantity control valve to high-pressure pump

*BA07.16-P-1017-01E

4

Remove quantity control valve (Y94) from high-pressure pump (1) and disconnect electrical connector (3)

Installation: Replace sealing ring at quantity control valve (Y94).

5

Install in the reverse order

6

Read out fault memory; clear if necessary

When replacing quantity control valve (Y94).

AD00.00-P-2000-04MCC

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Perform engine test run and check fuel system in area of quantity control valve (Y94) for leaks

Common rail diesel injection (CDI)

Number

Designation

Engine 660.950/951

BA07.16-P-1017-01E

Bolt, quantity control valve to high-pressure pump

Nm

7

Powiązane dokumenty