Replace valve stem seals

AR05.30-G-3510MT

11.11.11

MODEL 000.001 with ENGINE 444.901
Euro 1

MODEL 000.001 with ENGINE 444.901
Euro 2

MODEL 000.001 with ENGINE 447.903
Euro 2

1  Assembly sleeve

2 Valve stem seal

T05.30-0008-03

	Remove
1	Remove cylinder head		AR01.30-G-5800MT
2	Remove valve springs	Cylinder head holding fixture 2000	AR05.30-G-3510-03MT
			*210589004000
			*442589003100
3	Detach used valve stem seal
	Install
4	Place assembly sleeve (1) on valve stem (arrows)	 Lubricate outer surface of assembly sleeve (1).
			*403589006100
5	Push valve stem seal (2) over assembly sleeve (1) and press on its seat
6	Detach assembly sleeve (1)		*403589006100
7	Install valve springs	Cylinder head holding fixture 2000	AR05.30-G-3510-03MT
			*BE05.30-N-1001-05G
			*BE05.30-N-1002-05G
			*210589004000
			*442589003100
8	Install cylinder head		AR01.30-G-5800MT

Check values for valve springs

Number	Designation		Engine 444.901, 447.903


BE05.30-N-1001-05G	Length of valve spring, outside (no load)	mm	67.5 to 68.5
BE05.30-N-1002-05G	Length of valve spring, inside (no load)	mm	69.5 to 70.5

403 589 00 61 00

Valve lifter

Sleeve

Magnetic pin

210 589 00 40 00

442 589 00 31 00