AR05.10-S-8426-02EA | Tension tensioning rail for bush chain of oil pump | ||
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. |
1 | Turn tensioning rail (1.2) clockwise with a suitable tool until the bores (arrow A) of the slide rail (1.1) and tensioning rail (1.2) are flush. |
2 | Insert a drill bit with a diameter of 3.5 mm into the bores (arrow A) up to end stop and secure the tensioning rail (1.2) against twisting. |
1.1 | Slide rail (timing chain) |
1.2 | Tensioning rail (bush chain of the oil pump (4)) |
4 | Bush chain of the oil pump |
S05.10-A006-12