ar0510p8510mfd

Remove/install tensioning rail timing chain

Typ ar · temat 05.10 · wersja 0101 · 2019-10-26

Dotyczy: Engine 282 in model 118, 177, 247

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 05 Sterowanie pracą silnika › 05.10 Napęd łańcuchem rozrządu, napęd paskiem zębatym — Seria 118 · Seria 177 · Seria 247

EinPAS 15 Silnik › 15.17 Rozrząd silnika › 15.17.34 Napęd łańcuchowy/ pasek zębaty/ napęd kołami zębatymi — Seria 118 · Seria 177 · Seria 247

Dotyczy też silników/skrzyń biegów: 282 ***

AR05.10-P-8510MFD

Remove/install tensioning rail timing chain

14.08.2019

Engine

282 in model 118, 177, 247

Remove/install tensioning rail timing chain

P05.10-2618-09

1

Timing chain

9

Slide rail

2

Chain tensioner

12

Slide rail

5

Tensioning rail

14

Slide rail pins

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Check timing of the engine.

AR05.20-P-6010MFD

Installation: Only install upper engine cover after the leak test.

2

Remove chain tensioner (2).

AR05.10-P-7800MFD

Installation: Only install lower engine compartment paneling after leak test.

3

Remove tensioning rail (5) from timing chain (1) and slide rail pin (14).

4

Check tensioning rail (5) for wear, galling, and damage.

If a problem is identified,

replace tensioning rail (5), slide rails (9, 12), and timing chain (1).

Replace timing chain

AR05.10-P-7602MFD

Install new timing chain slide rails

AR05.10-P-8480MFD

5

Install in the reverse order.

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Perform engine test run. While doing so, check engine for proper operation and leak tightness.

7

Install lower engine compartment lining.

AR61.20-P-1105MFA

8

Install upper engine cover.

AP01.10-P-2405-01D

Powiązane dokumenty