ENGINE | 646 in MODEL 909 |
602 589 04 63 00
Thrust spindle
602 589 04 63 01
Pressure pins
602 589 02 33 00
Chain separating tool
611 589 01 40 00
Retainer device
602 589 00 98 00
Case
When carrying out work on the timing case recess, cover it with a clean rag to prevent small parts dropping down. Parts that have fallen into the timing case recess must be removed otherwise the chain drive can be damaged.
1 | Attach the holding device (1) to the cylinder head. |
D05.10-1106-01
2 | Assemble chain breaker tool (2) and thrust spindle (3) with pressure pins from the case. |
D05.10-1107-01
3 | Fit the chain breaker tool (2) onto the timing chain (4). |
Ensure when putting on the thrust spindle (3) that the pressure pin fits closely at the timing chain bolt of a chain link. |
4 | Screw in thrust spindle (3) and separate timing chain (4). |
Do not allow pressed out pins (5) to fall into the timing case recess otherwise damage may occur to the timing chain drive. |
5 | Remove the thrust spindle (3) and remove the chain breaker tool (2). |
N05.10-2010-03