ar0500s2013ps

Remove/install hydraulic valve play compensation elements

Typ ar · temat 05.00 · wersja 0100 · 2018-12-20

Dotyczy: Engine 642 in model 470, 471

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 05 Sterowanie pracą silnika › 05.00 Informacje ogólne — Seria 470 · Seria 471

EinPAS 15 Silnik › 15.17 Rozrząd silnika › 15.17.30 Rozrząd zaworowy — Seria 470 · Seria 471

Dotyczy też silników/skrzyń biegów: 642 ***

AR05.00-S-2013PS

Remove/install hydraulic valve play compensation elements

17.05.2018

Engine

642 in model 470, 471

Remove/install hydraulic valve play compensation elements

1

Compensating element

2

Clamp

3

Roller-type cam follower

P05.00-2059-11

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove camshafts.

AR05.20-S-6992PS

2

Remove roller cam follower (3) with the associated compensating elements (1).

3

Lever off the clamps (2).

4

Detach compensating elements (1) from roller-type cam followers (3).

Check

5

Check compensating elements (1) for proper operation.


Only push compensating element (1) together by hand, do not use a steel tool.
Otherwise the surface of the compensating element (1) will be damaged.

It should not be possible to press the compensating elements (1) together with normal force of the hand and they should move together only very slowly when great pressure is applied.

If there is a problem,

replace the compensating element (1).

If several compensating elements (1) are defective,

Check forced oil supply of cylinder head.


AR18.00-S-1250SE

6

Install in the reverse order.

Powiązane dokumenty