ar0500p2500fg

Removing and installing the cam follower

Typ ar · temat 05.00 · wersja 0100 · 2004-11-22

Dotyczy: ENGINE 639.939 in MODEL 454.0

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 05 Sterowanie pracą silnika › 05.00 Informacje ogólne — Seria 454 (modele 0**) · Seria 639 (modele 939)

EinPAS 15 Silnik › 15.17 Rozrząd silnika › 15.17.30 Rozrząd zaworowy — Seria 454 (modele 0**) · Seria 639 (modele 939)

AR05.00-P-2500FG

Removing and installing the cam follower

29.9.04

ENGINE 639.939 in MODEL 454.0

Removing and installing the cam follower

P05.00-2064-08

1 Hydraulic valve clearance compensation elements with roller-type cam follower

2 Cylinder head

Removing and installing the cam follower

P05.00-2065-01

1.1 Roller drag lever

1.2 Hydraulic valve clearance compensation element

Removing/installing

1.1

Remove inlet camshaft

When renewing the roller-type cam follower (1.1) on the intake valves.

AR05.20-P-6292FG

1.2

Remove exhaust camshafts

When renewing the roller-type cam follower (1.1) on the exhaust valves.

AR05.20-P-6292FH

2

Remove hydraulic valve clearance compensation elements with roller-type cam follower (1) from the cylinder head (2)

Mark the hydraulic valve clearance compensation elements with roller-type cam follower (1) to be reused and install again in the same position.

3

Unclip hydraulic valve clearance compensation element (1.2) from the roller-type cam follower (1.1) spring (arrow) and remove

Do not disassemble hydraulic valve clearance compensation element (1.2) since this would destroy it.

Observe correct seating of the spring (arrow).

4

Install in reverse order

Powiązane dokumenty