AR03.30-S-8001C | Removing and installing flywheel / driven plate | 18.4.97 |
ENGINE 104.900 in MODEL 638.2
S03.30-2501-06
1 Bolt
2 Driven plate
3 Crankshaft
4 Inner plate
5 Outer plate
| Removing, installing | ||
1 | Remove automatic transmission | ||
2 | Attach countering support to belt pulley / vibration damper | Countersupport | |
3Unscrew bolts (1) from driven plate (2) on crankshaft (3) | Do not confuse inner control disc (4) with outer control disc (5) or their original position. Installation: Replace bolts (1). | ||
| |||
Torx bolt inserts | |||
4 | Detach driven plate (2) from crankshaft (3) | ||
5 | Install in the reverse order |
Flywheel, driven plate, vibration damper, starter ring gear
Number | Designation | Engine 104.900 | ||
BA03.30-N-1002-01H | Bolt, driven plate to crankshaft | 1st stage | Nm | 60 |
2nd stage | ° | 90 | ||
000 589 01 10 00
Torx bolt inserts
Counter-support
104 589 01 40 00