S03.30-4540-77
1 | Bolts | 2 | Retaining lock |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Install/remove | |||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2 | Remove center and rear section of the bottom engine compartment lining. | ||
3 | Counterhold nuts and remove screws (1). | Bolt, cover on starter opening to crankcase | |
4 | Remove cap from the opening on the crankcase. | ||
5 | Insert retaining lock (2) into opening. | Retaining lock | |
If the retaining lock (2) cannot be inserted, | |||
| |||
Remove front engine compartment lining and turn engine at the center bolt of the vibration damper in the direction of engine rotation until the retaining lock (2) can be inserted. | |||
6 | Install in the reverse order. |
112 589 03 40 00
Retaining lock
Powiązane dokumenty
- ar0100s0100ps
- ar6120s1105p
- as0000z000901a Niebezpieczeństwo zakleszczenia lub zmiażdżenia, w skrajnym przypadku obcięcia kończyn podczas prac przy układach mechanicznych.
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.