Remove/install guide bearing in flywheel · ar0330d8401ad · Mercedes-Benz WIS

AR03.30-D-8401AD

Remove/install guide bearing in flywheel

15.6.09

ENGINE 900.917 /918 /919 in MODEL 668, 670 with TRANSMISSION 712.613, 715.051

D03.30-1122-12

1 Guide bearing

2 Flywheel

3  Countersupport

4  Internal extractor

	Removing
1	Remove clutch		AR25.10-D-0050AD
2	Pull out guide bearing (1) with counter stay (3) and internal extractor (4)	 Place underlays e.g. copper plates under counter stay (3) supports to prevent damage occurring to flywheel (2).
		 If spacer ring (1) is installed behind guide bearing (1), this can remain installed.
			*000589273300
			*000589333300
	Install
3	Hammer in guide bearing (1) using a suitable drift	 The chamfer of the spacer ring behind the guide bearing (1) must point in the direction of crankshaft. Grease new guide bearing (1) using MB long-life grease.
		Long-life grease	*BR00.45-Z-1001-06A
4	Clean guide bearing (1) after pounding in at outer race and secure using a securing device	Locking compound Loctite 221	*BR00.45-Z-1036-02A
5	Install clutch		AR25.10-D-0050AD

000 589 33 33 00

Counter stay

Internal puller

000 589 27 33 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1036-02A	Locking compound Loctite 221	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11