Removing and installing grooved ball bearing of crankshaft · ar0320s8400a · Mercedes-Benz WIS

AR03.20-S-8400A

Removing and installing grooved ball bearing of crankshaft

6.2.95

ENGINE 111 in MODEL 638

S03.20-3005-09

1 Separator ring

2 Rigid radial bearing

3 Sealing cover

4  Puller

5  Supplement

 	Removing and installing
1.1	Remove the manual gearbox		AR26.10-S-0020A
1.2	Remove the automatic gearbox
2	Remove the clutch		AR25.10-S-0050A
3	Remove the rigid radial bearing (2)	 Take off the sealing cover (3) together with the rigid radial bearing (2)
			*000589253300
			*000589333300
		 Installation: With the aid of a suitable sleeve, knock the rigid radial bearing (2) as far as it will go through the separator ring (1). The rigid radial bearing (2) must be firmly seated on the crankshaft. With the aid of a suitable sleeve, knock in a new sealing cover (3) as far as it will go.
4	Installation in reverse order

000 589 25 33 00

000 589 33 33 00

Bracing tool

Internal puller