ar0320p3000lfb

Replace front crankshaft radial sealing ring

Typ ar · temat 03.20 · wersja 0101 · 2014-11-11

Dotyczy: ENGINE 157, 278 in MODEL 217 ENGINE 157, 278 in MODEL 222

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 03 Zespół napędowy › 03.20 Wał korbowy — Seria 217 · Seria 222

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.41 Wał korbowy/ koło zamachowe/ tarcza sprzęgła — Seria 217 · Seria 222

Dotyczy też silników/skrzyń biegów: 157 ***, 278 ***

AR03.20-P-3000LFB

Replace front crankshaft radial sealing ring

28.10.2014

ENGINE

157, 278 in MODEL 217

ENGINE

157, 278 in MODEL 222

Replace front crankshaft radial sealing ring

1

Crankshaft

3

Crankshaft center bolt

4

Woodruff key

5

Radial shaft sealing ring

8

Belt pulley/vibration damper

B

Installation depth

P03.20-2318-06

Remove/install

1

Remove belt pulley/vibration damper (8)


ENGINE 157, 278 in MODEL 217
ENGINE 157, 278 in MODEL 222

AR03.30-P-1600LFB

2

Press out radial shaft sealing ring (5) from the mounting hole using a screwdriver

AR03.20-P-3000-01MM


Do not damage crankshaft (1) and mounting hole. Use a clean rag as a base when pushing out.
Leaks can otherwise occur.

Installation: Install front radial shaft sealing ring (5).

Sleeve

*119589011400

3

Check contact surface of radial shaft sealing ring (5) at hub of belt pulley/vibration damper (8)

In a case of scorch marks and galling:

Replace belt pulley/vibration damper (8).

4

Install in the reverse order

5

Check engine oil level; correct if necessary

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out an engine test run and check engine for leaktightness

Replace front crankshaft radial sealing ring

119 589 01 14 00

Sleeve

Powiązane dokumenty