ar0320b3000a
Replace front crankshaft radial sealing ring
Typ ar · temat 03.20 · wersja 0202 · 2019-10-29
Dotyczy: Engine 904.9, 906.9, 924.9, 926.9 in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 1 Silnik › 03 Zespół napędowy › 03.20 Wał korbowy — Seria 368 (modele 0**, 1**) · Seria 382 (modele 1**) · Seria 384 (modele 06*, 07*) · Seria 634 (modele 0**) · Seria 685 (modele 282, 284, 289, 290) · Seria 904 (modele 9**) · Seria 906 (modele 9**) · Seria 979 (modele 2**)
EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.41 Wał korbowy/ koło zamachowe/ tarcza sprzęgła — Seria 368 (modele 0**, 1**) · Seria 382 (modele 1**) · Seria 384 (modele 06*, 07*) · Seria 634 (modele 0**) · Seria 685 (modele 282, 284, 289, 290) · Seria 904 (modele 9**) · Seria 906 (modele 9**) · Seria 979 (modele 2**)
Dotyczy też silników/skrzyń biegów: 924 9**, 926 9**
AR03.20-B-3000A
| Replace front crankshaft radial sealing ring
| 14.10.2019
|
Engine
| 904.9, 906.9, 924.9, 926.9 in model 368.0/1, 382.1, 384.06/07, 634.0, 685.282/284/289/290, 979.2
|
1
| Anti-vibration pulley
|
| 4
| Superb thread screw
|
2
| Front camshaft retainer
|
| 5
| Guide sleeve
|
3
| Extractor
|
| 6
| Mandrel
|
| Remove
|
|
|
1
| Remove the vibration-absorbing pulley (1)
|
Engine 904.9, 906.9, 924.9, 926.9
| AR03.30-B-1600H
|
2
| Secure the puller (3) with 3 superb threaded screws (4) with a diameter of 3.2 mm to the crankcase seal (2)
| Puller
| *904589003300
|
3
| Remove the seal (2)
| Puller
| *904589003300
|
| Check
|
|
|
4
| Check the contact surface of the crankcase seal for wear
| In case of wear, apply seal with a dummy rail (repair).
|
|
| Install
|
|
|
5
| After installing the guide bushing (5) on the crankshaft, position the seal (2) on it
| When installing the seal (2) on the guide bushing (5), the sealing lip should face the oil pump.
|
|
|
|
| Drift
| *904589021500
|
6
| Using the mandrel (6), insert the seal (2) into the oil pump housing
| Drift
| *904589021500
|
7
| Install the vibration damper pulley (1)
| Remove/install belt pulley/vibration damper
Engine 904.9, 906.9, 924.9, 926.9
| AR03.30-B-1600H
|
Powiązane dokumenty
