ar0310w0002r

Additional test works during an engine repair on piston/connecting rod and on cylinder barrel

Typ ar · temat 03.10 · wersja 0100 · 2009-02-24

Dotyczy: ENGINE 926.9 in MODEL 949

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 03 Zespół napędowy › 03.10 Korbowody, tłoki — Seria 949

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.40 Korbowód/ tłok — Seria 949

Dotyczy też silników/skrzyń biegów: 926 9**

AR03.10-W-0002R

Additional test works during an engine repair on piston/connecting rod and on cylinder barrel

28.1.09

ENGINE 926.9 in MODEL 949

Checking

1

Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition

Only if there is advanced wear or damage to engine components.

Engine oil and filter change

AP18.00-W-0101R

2

Replace oil-water heat exchanger

Only if there is metal grit on the oil filter element lamella or in the engine oil circuit.

AR18.30-W-6840R

3

Remove, check and replace oil spray nozzle, if necessary

Only if piston was damaged.

AR18.00-W-4000R

4

Remove oil pump, disassemble and check for wear and damage by means of a visual inspection

Only removed if an increased amount of metal grit was found on oil filter element lamella.

AR18.10-W-6020R

5

Replace engine oil and oil filter element

If metal abrasion or swollen condition of oil filter element (coolant in engine oil circuit).

Engine oil and filter change

AP18.00-W-0101R

Powiązane dokumenty