S01.40-4500-09
| Remove | ||
1 | Drain coolant | ||
2 | Remove detachable parts in the leaky area around leaking core hole cap | Location of core hole cap (arrows). | |
3 | Turn core hole cap (Fig. A) | Use a screwdriver to knock in one side of the core hole cap sufficiently until it is possible to grasp the collar. | |
4 | Pull out core hole cap at collar (picture B) | ||
| Install | ||
5 | Thoroughly clean sealing surface of core hole bore (arrow in picture C) | The bonding surfaces must be free of oil, water and rust. | |
Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | |||
6 | Spray sealing surface with activator | Thread locking adhesive, Loctite 241 | |
7 | Coat core hole with sealant | Thread locking adhesive, Loctite 241 | |
8 | Knock in the core hole cap until flush (picture D) | Drift | |
Drift | |||
9 | Install detachable parts | ||
10 | Fill up coolant and check cooling system for leaktightness | ||
The thread locking adhesive must be allowed to harden for about 45 minutes before pouring in the coolant. |
102 589 00 15 00
Drift
102 589 12 15 00
Drift
Repair materials |
Number | Designation | Order number |
BR00.45-Z-1001-02A | Thread locking adhesive, Loctite 241 | A 002 989 94 71 |
BR00.45-Z-1051-04A | Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | Chemische Werke Kluthe GmbH |