1 | Steel ball |
2 | Crankshaft |
P01.40-2052-01
N01.40-2085-01
| Remove | ||
1 | Remove flywheel | ||
2 | Remove timing case cover | ||
3 | Knock out steel ball (1) with a steel rod from the front (arrow) to the rear out of the crankcase | The steel rod must have a diameter of 14 mm and a length of 700 mm. | |
| Install | ||
4 | Check steel ball (1) | Check steel ball (1) for damage and replace if necessary. An undamaged steel ball (1) can be used several times. | |
5 | Clean seat of steel ball (1) in crankcase | Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | |
6 | Place steel ball (1) with long-life grease on drift and knock into crankcase up to specified stop on drift | Long-life grease | |
Drift | |||
7 | Install timing case cover | ||
8 | Install flywheel |
601 589 08 15 00
Drift
Repair materials |
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |
BR00.45-Z-1051-04A | Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | Chemische Werke Kluthe GmbH |