904 589 01 63 00
Lifting device
D01.30-0054-11
1 Attach lifting device (2) to the cylinder head (1) and take off cylinder head.
Place cylinder head (1) down on its side so that the installed nozzle holder combinations are not damaged.
2 Take off cylinder head gasket (3).
3 Clean crankcase contact surface and inspect.
4 Fit new cylinder head gasket (3) over the centering sleeves (4) onto the plane surface of the crankcase.
Pay attention to installation position of cylinder head gasket.
5 Fit cylinder head (1) over the centering sleeves (4).
6 Detach lifting device (2) at cylinder head (1).