ar0120s9520cd

Remove/install oil filler neck

Typ ar · temat 01.20 · wersja 0100 · 2012-10-04

Dotyczy: MODEL 415 with ENGINE 607

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.20 Odpowietrzanie silnika, pokrywa głowicy cylindrów — Seria 415

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.43 Miska olejowa/ króciec wlewu — Seria 415

Dotyczy też silników/skrzyń biegów: 607 ***

AR01.20-S-9520CD

Remove/install oil filler neck

19.09.2012

MODEL

415 with ENGINE 607

Remove/install oil filler neck

1

Cover

2

Filler neck

3

Screw/bolt

4

Hose

S01.20-4524-11

Remove/install

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove starter

AR15.30-S-7100CD

2

Remove oil dipstick

Do do this open cover (1) and pull out oil dipstick; the oil dipstick is integrated in the cover (1).

3

Remove filler neck (2)

Do do this remove screw/bolts (3) and remove hose (4) from cylinder crankcase.

Mounting wedge

*110589035900

4

Install in the reverse order

Remove/install oil filler neck

110 589 03 59 00

Mounting wedge

Powiązane dokumenty