ar0120s501403ef
Bolt tightening procedure for cylinder head cover
Typ ar · temat 01.20 · wersja 0100 · 2014-12-18
Dotyczy: MODEL 447 with ENGINE 622
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.20 Odpowietrzanie silnika, pokrywa głowicy cylindrów — Seria 447 · Seria 622
EinPAS 15 Silnik › 15.16 Głowica cylindrów › 15.16.30 Pokrywa głowicy cylindrów — Seria 447 · Seria 622
AR01.20-S-5014-03EF
| Bolt tightening procedure for cylinder head cover
|
|
|
MODEL
| 447 with ENGINE 622
|
Number
| Designation
|
| ENGINE 622 in MODEL 447
|
BA01.20-N-1001-01V
| Bolt, cylinder head cover to cylinder head
| Nm
| 12
|
1
| Remove both pilot bushings out of the bores on the cylinder head cover.
|
|
| The pilot bushings serve as a guide for the cylinder head cover and are placed before attaching the cylinder head cover to the cylinder head.
|
2
| Tighten screw/bolts (12, 15, 18 and 21). .
|
3
| Screw in the remaining screw/bolts of the cylinder head cover and tighten finger-tight.
|
4
| Unfasten screw/bolts (12, 15, 18 and 21) and tighten finger-tight.
|
5
| Tighten cylinder head cover bolts in the numerical sequence. .
|
