ar0120p0020msa

Remove/install wide open throttle vent line

Typ ar · temat 01.20 · wersja 0101 · 2018-07-31

Dotyczy: Engine 256.9 in model 213, 238, 257, 290

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.20 Odpowietrzanie silnika, pokrywa głowicy cylindrów — Seria 213 · Seria 238 · Seria 257 · Seria 290

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.31 Skrzynia korbowa/separator oleju/odpowietrznik — Seria 213 · Seria 238 · Seria 257 · Seria 290

Dotyczy też silników/skrzyń biegów: 256 9**

AR01.20-P-0020MSA

Remove/install wide open throttle vent line

27.07.2018

Engine

256.9 in model 213, 238, 257, 290

Remove/install wide open throttle vent line

Shown on M256.9 with code M016 (performance-enhanced engine)

1

Wide open throttle bleed line

2

Purge line

3

Partial load bleed line

4

Screw

5

Check valve

6

Oil separator

P01.20-2428-06

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove engine air intake duct downstream of air filter housing.

AR09.10-P-8130MSA

2

Remove front noise insulation.

3

Remove screw (4).

Bolt, breather adapter to exhaust gas turbocharger

*BA01.20-P-1014-01L

4

Remove purge line (2) from full load bleed line (1).

5.1

Remove full load bleed line (1) from charge air line.

Engine 256.9 in model 257
except code M016 (Uprated engine)

5.2

Remove full load bleed line (1) from check valve (5).

Engine 256.9 in model 257
with code M016 (Uprated engine)

6

Remove partial load bleed line (3) from full load bleed line (1).

7

Remove full load bleed line (1) from oil separator (6).

8

Remove full load bleed line (1) from exhaust gas turbocharger and take out.

9

Install in the reverse order.

Crankcase ventilation, cylinder head cover

Number

Designation

Engine 256.9

BA01.20-P-1014-01L

Bolt, breather adapter to exhaust gas turbocharger

Nm

8

Powiązane dokumenty