ar0120b5014tc

Remove/install cylinder head cover

Typ ar · temat 01.20 · wersja 0200 · 2019-04-01

Dotyczy: Engine 457 in model 958.461 Engine 457.9, 460.984 in model 934.241/251, 938.14 Engine 457.918 in model 958.431/433/451/471/472/478 Engine 541.97 in model 936.315

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.20 Odpowietrzanie silnika, pokrywa głowicy cylindrów — Seria 460 (modele 984) · Seria 934 (modele 241, 251) · Seria 936 (modele 315) · Seria 938 (modele 14*) · Seria 958 (modele 431, 433, 451, 461, 471, 472, 478)

EinPAS 15 Silnik › 15.16 Głowica cylindrów › 15.16.30 Pokrywa głowicy cylindrów — Seria 460 (modele 984) · Seria 934 (modele 241, 251) · Seria 936 (modele 315) · Seria 938 (modele 14*) · Seria 958 (modele 431, 433, 451, 461, 471, 472, 478)

Dotyczy też silników/skrzyń biegów: 457 ***, 457 9**, 457 918, 541 97*

AR01.20-B-5014TC

Remove/install cylinder head cover

15.03.2019

Engine

457 in model 958.461

Engine

457.9, 460.984 in model 934.241/251, 938.14

Engine

457.918 in model 958.431/433/451/471/472/478

Engine

541.97 in model 936.315

Modification notes

14.03.2019

Cylinder head cover bolt (plastic)

BA01.20-B-1002-01B

Remove/install cylinder head cover

1

Cylinder head cover

2

Gasket

W01.20-1018-11

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Remove/install

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut.

AS60.80-Z-0001-01A

1

Tilt the cabin

Installation: Only after the tilting sealing test put the cab backward.

2

Remove the head cap (1)

Installation: Clean the head cover sealing faces (1) and cylinder head. Replace the gasket (2).

Engine 457.9, 460.9Cylinder head cover bolt (plastic)

*BA01.20-B-1002-01B

Engine 541.9Bolt, cylinder head cover to cylinder head

*BA01.20-N-1001-01C

3

Install in reverse order

Check

4

Check the seal in the cylinder head cover (1)

The check should be done with the engine running

Visual inspection

Engine vent. cylinder head cover

Number

Designation

Engine 457.9, 460.9

BA01.20-B-1002-01B

Cylinder head cover bolt (plastic)

Nm

20

Crankcase ventilation, cylinder head cover

Number

Designation

ENGINE 541.9, 542.9

BA01.20-N-1001-01C

Bolt, cylinder head cover to cylinder head

Nm

20

Powiązane dokumenty