Remove/install cylinder head cover

AR01.20-B-5014J

12.02.16

Cumbustion engine 376.919 with Vehicle 382.068

B01.20-0009-04

M 366 LAG

1 Head cap

2 Ignition coils

3 Cap fastening screws

4 Flat washer

5 Cap gasket

6 O-rings in protective sleeves

7 Spark plug protective sleeve

	Remove and install
Danger!	Safety measures when servicing gas engines.		AS00.00-B-0015-01A
	The access for maintenance and repair work vary according to the type/manufacturer of the body.	Refer to the bodybuilder's instructions.
1	Turn off the main switch or disconnect the negative battery cable.
2	Clean the top of the engine.
3	Remove the ignition coils (2).		AR15.12-B-2003B
4	Remove the screws (3) and washers (4).	Install: Tighten the screws evenly and alternately.
			*BA01.20-B-1001-01A
5	Remove the cap (1) and the gasket (5).	Install: Replace the gasket (5). Check the O-rings (6), replace if necessary.
6	Install in the reverse order.

Crankcase ventilation, cylinder head cover