ar0110d240001d

Removing and installing engine with removal fixture

Typ ar · temat 01.10 · wersja 0105 · 2006-07-26

Dotyczy: ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.10 Silnik kompletny — Seria 668 · Seria 670 · Seria 904 (modele 908, 914, 923, 936)

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.15 Silnik spalinowy kompletny — Seria 668 · Seria 670 · Seria 904 (modele 908, 914, 923, 936)

AR01.10-D-2400-01D

Removing and installing engine with removal fixture

Commercially available tools

Number

Designation

WH58.30-Z-1001-07A

Shackle, DIN 82101

Workshop equipment

WE58.40-Z-1022-11A

Engine supporting arm

Removing and installing engine with removal fixture

D22.10-0051-01

1 Unscrew top securing bolt at right and left engine mount.

Installation: Mount engine lightly onto the engine mounts, screw in the securing bolts and tighten by hand until they make contact. Then, lower the engine fully and tighten securing bolts fully.

Removing and installing engine with removal fixture

L01.10-0001-11

2 Insert engine supporting arm (1) and attach as close as possible to the lifting eyes (2, 3) at the engine by means of chains and shackle.

Before raising engine, set center of gravity and tighten clamping bolt (arrow) fully.

3 Raise engine slightly with fork-lift truck.

Removing and installing engine with removal fixture

D22.10-0052-01

4 Unscrew bolt at bottom at engine mount and remove right and left engine mounts complete.

Pay attention to installation position.
Inspect engine mounts for wear, replace if necessary.

5 Raise engine further and remove carefully.

Place down engine and transmission reliably after lifting out.