AR01.00-S-2410D | Disconnecting, connecting engine wiring harness | 3.5.99 |
ENGINE 104.900 in MODEL 638.2
S01.00-2515-09
1 Connector box
2 Voltage supply cable
3 Connector
X98 Main wiring harness/engine connector II
X175 Injection valve connector
B39 Mass air flow sensor
B39.1 Mass air flow sensor connector
S01.00-2516-09
4 Ground cable
B58 Knock sensor 1
B58.1 Knock sensor 1 connector
S75.1 Automatic transmission position switch connector
E93 Crankcase heater
E93.1 Crankcase heater connector
| Removing, installing | ||
1 | Disconnect ground cable at battery | Installation: Code the radio and set the clock. | |
2 | Disconnect connector from main wiring harness / engine connector II (X98) | Bayonet lock | |
3 | Detach cover from connector box (1) | ||
4 | Disconnect connector from connector box (1) | ||
5 | Unscrew voltage supply cable (2) on connector box (1) | | |
6 | Disconnect both connectors (3) on the fan shroud | ||
7 | Detach engine design cover | ||
8 | Disconnect connector from injection valve (X175) | ||
9 | Disconnect mass air flow sensor connector (B39.1) from mass air flow sensor (B39) | ||
10 | Disconnect connector (E93.1) from crankcase heater (E93) | ||
11 | Disconnect connector (B58.1) from knock sensor 1 (B58) | ||
12 | Detach ground cable (4) from the body | | |
13 | Disconnect automatic transmission position switch connector (S75.1) | ||
14 | Install in the reverse order |
Battery