220 589 00 99 02
Adapter line
For measurements at the contact (1.4), the adapter line must be used.
P00.19-6756-77
1 | Remove support (1.1). |
If installed. |
2 | Move retaining cap (1.2) forward in direction of arrow (A) as far as end stop with a suitable tool. |
3 | Release retaining cap (1.2) with a suitable tool and remove. |
4 | Insert a scriber (1.3) under the locking clip (1.5) on the front side of the connector socket (1). Raise locking clip (1.5) in direction of arrow (B) and hold. |
5 | By pulling the corresponding electric line, unpin contact (1.4) from connector socket (1). |