ap8310g8337e

Clean ventilation filter, inspect and replace if necessary

Typ ap · temat 83.10 · wersja 0100 · 2007-11-15

Dotyczy: MODEL 405.050 with BODY 979.820

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.10 Wentylacja — Seria 405 (modele 050) · Seria 979 (modele 820)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.32 Obudowa/wymiennik ciepła/parownik/filtr — Seria 405 (modele 050) · Seria 979 (modele 820)

AP83.10-G-8337E

Clean ventilation filter, inspect and replace if necessary

13.11.07

MODEL 405.050 with BODY 979.820

Clean ventilation filter, inspect and replace if necessary

G83.10-3154-07

1 Heater housing

2 Cover

3 Release handle

4 Screw

5 Ventilation filter

Removing

1

Remove bolts (4)

2

Remove cover (2)

In doing, so lift the release handle (3) upwards.

3

Remove ventilation filter (5) from heater housing (1) (arrow)

Clean

4

Clean ventilation filter (5) using compressed air

In the event of strong soiling, the ventilation filter (5) is to be replaced.

Install

5

Install ventilation filter (5) into the heater housing (1)

The arrows on the ventilation filter (5) must face towards the passenger compartment.

6

Install cap (2)

Hook cover (2) upwards into heater housing (1) and then press at bottom onto the heater housing (1), until the release handle (3) is locked.

7

Screw in screws (4)