ap8300p8381m

Replacing dust filter for heater/ventilation

Typ ap · temat 83.00 · wersja 0100 · 2001-10-22

Dotyczy: MODEL 124 with CODE (305a) Dust filter with CODE (580) Air conditioning or Tempmatic for USA with CODE (581a) Air conditioning (Automatic)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.00 Informacje ogólne — Seria 124

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.32 Obudowa/wymiennik ciepła/parownik/filtr — Seria 124

AP83.00-P-8381M

Replacing dust filter for heater/ventilation

1.12.93

MODEL 124
with CODE (305a) Dust filter
with CODE (580) Air conditioning or Tempmatic for USA
with CODE (581a) Air conditioning (Automatic)

Replacing dust filter for heater/ventilation

P83.25-0245-06

4 Seal

5, 6 Lip seal

7 Clips

8, 9, 10 Screws

11 Air inlet

15 Center section

Replacing dust filter for heater/ventilation

P83.25-0246-06

1 Dust filter

2, 3 Clips

9, 10 Screws

11, 12 Air inlet

Note
Illustrated with windshield wiper removed

Removal, installation

1

Pull off seal (4) up to windshield wiper

2

Pull off lip seals (5, 6)

3

Remove center section (15) (2 clips)

4

Remove left water drain (clips 7, screws 8)

5

Remove air inlet (1) upward (screws 9, 10)

6

Remove air inlet (12) screws (10) and remove upward

7

Fold over clips (2)

8

Lift dust filter (1) pull out to left

If necessary help through right opening

9

Pull dust filter (1) forward, then pull out to left

Installation:
When installing the dust filter halves ensure that clips 2 and 3 are properly seated. Both halves of the dust filter must catch properly at the separation point.

10

Reinstall in reverse order