Auxiliary heater function check

Typ ap · temat 83.00 · wersja 0102 · 2006-11-29

Dotyczy: MODEL 667, 668, 670 with ENGINE 602 with CODE (H12) Warm water auxiliary heater with CODE (H14) High performance warm water auxiliary heater MODEL 668, 670 with ENGINE 904 with CODE (H12) Warm water auxiliary heater with CODE (H14) High performance warm water auxiliary heater MODEL 668, 670 with ENGINE 900.9 with CODE (H12) Warm water auxiliary heater with CODE (H14) High performance warm water auxiliary heater

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.00 Informacje ogólne — Seria 602 · Seria 667 · Seria 668 · Seria 670 · Seria 900 (modele 9**) · Seria 904

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.5 Ogrzewanie postojowe/ogrzewanie dodatkowe kompletne — Seria 602 · Seria 667 · Seria 668 · Seria 670 · Seria 900 (modele 9**) · Seria 904

AP83.00-D-8351-01A

Auxiliary heater function check

Warm water auxiliary heater

N83.70-0317-01

1 Set heater temperature setting switch to maximum heating power, and move blower rotary switch to position "1".

2 Switch on auxiliary heater with immediate heating switch (5) at timer or using the auxiliary heater switch on the instrument panel. The operating indicator lamp (6) in the timer or the switch on the instrument panel must illuminate.

The combustion air blower and the circulation pump must start up.
The combustion process must start after a preheating phase of approx. 40 seconds.

3 Switch auxiliary heater off after approx. 5 minutes of operation. To do this, operate switch (5) at timer or auxiliary heater switch on instrument panel again. The operating indicator lamp must go off.

 The circulation pump and the combustion air blower must continue to run for approx. 2 - 3 minutes to cool the equipment down.

4 Return heater temperature selector switch to original position.