ap8057b8050a

Check immobilizer for proper function

Typ ap · temat 80.57 · wersja 0100 · 2018-06-06

Dotyczy: Model 364, 368, 382, 384, 634, 979

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 80 Zamek centralny, sterowanie komfortowe, układ uprawniający do jazdy › 80.57 Układy uprawniające do jazdy (FBS) — Seria 364 · Seria 368 · Seria 382 · Seria 384 · Seria 634 · Seria 979

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.25 Układ uprawniający do jazdy › 29.25.1 Informacje podstawowe — Seria 364 · Seria 368 · Seria 382 · Seria 384 · Seria 634 · Seria 979

AP80.57-B-8050A

Check immobilizer for proper function

30.05.2018

Model

364, 368, 382, 384, 634, 979

Check immobilizer for proper function

Seta

Recommended limit for alignment of sensors

B54.00-1511-01

Check

1

Check if the sensors are mounted in parallel

The sensors must be mounted in parallel in the vehicle rear cover, with a recommended distance according to (arrow) of 5 mm and can vary in 1 mm.

When the engine compartment cover is open, for security reasons, the engine starting by means of the contact key located at the steering column must not operates.

2

Check the functioning of the neutral switch

The neutral switch must prevent the actuation of engine starting when the vehicle is engaged.

The functioning check of the neutral switch must be necessarily carried out with the clutch actuated.