ap5410b5410c

Batteries - checking and correcting fluid level

Typ ap · temat 54.10 · wersja 0101 · 2020-03-24

Dotyczy: Model 368 Model 382.0, 384.08/09

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.10 Akumulator, zasilanie, przetwornik napięcia — Seria 368 · Seria 382 (modele 0**) · Seria 384 (modele 08*, 09*)

EinPAS 25 Instalacja elektryczna/sieć wymiany danych/wielofunkcyjne › 25.20 Sieć pojazdu › 25.20.20 Akumulator — Seria 368 · Seria 382 (modele 0**) · Seria 384 (modele 08*, 09*)

AP54.10-B-5410C

Batteries - checking and correcting fluid level

16.03.2020

Model

368

Model

382.0, 384.08/09

Batteries - checking and correcting fluid level
Batteries - checking and correcting fluid level

1

Battery with no fluid level indicator

2

Battery with fluid level indicator

T54.10-0002-01

T54.10-0001-01

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Remove the cover cap

2

Clean the top part of the battery and remove the plugs

3

Check the battery level

The level will be correct if the electrolyte is from 10 to 15 mm above the plates or at the level mark.

4

Should it be necessary to refill, use only distilled water. Do not use metal funnel or containers to add water to the battery

Check if the vent holes on battery plugs are unobstructed.

5

Install the plugs

Powiązane dokumenty