Wear indicator in clutch booster |
1 | Protective cover |
2 | Rod |
a | New disc |
b | Worn disc |
B25.20-0001-01
Wear indicator (hydraulic clutch booster) |
3 | Wear indicator |
a | New disc |
b | Worn disc |
B25.20-0012-01
Wear indicator (hydraulic clutch booster) |
4 | Reference track |
a | New disc |
b | Worn disc |
B25.20-0013-01
| Check | ||
1 | Check the thickness of the end disc through the wear indicator | The checking of the clutch plate must be done with the clutch pedal at rest position. | |
In the clutch plate replacement, reset the wear indicator to the new disc position. | |||
2.1 | Lift-off the protection cap (1) and examine the position of the rod (2) | Model with wear indicator integrated into pneumatic cylinder | |
When the rod top (2) is facing indicator top (b), the clutch plate has replaced. | |||
2.2 | Check wear indicator position (3) | Model with wear indicator (hydraulic clutch) | |
When the indicator (3) on the cylinder rod is aligned with reference rod (b), the clutch plate has replaced. | |||
2.3 | Check reference track position (4) | Model with wear indicator (hydraulic clutch booster) | |
When the reference track (4) aligns with the reference mark (b), the clutch plate must be replaced |