ap1820i010004b

Replace oil filter element

Typ ap · temat 18.20 · wersja 0106 · 2007-04-03

Dotyczy: ENGINE 904.941 in MODEL 684.482

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 18 Układ smarowania silnika, układ chłodzenia oleju › 18.20 Filtr oleju — Seria 684 (modele 482) · Seria 904 (modele 941)

EinPAS 15 Silnik › 15.20 Układ smarowania silnika › 15.20.31 Filtr/chłodzenie/termostat/wentylator/zbiornik — Seria 684 (modele 482) · Seria 904 (modele 941)

AP18.20-I-0100-04B

Replace oil filter element

Oil filter

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA18.20-N-1003-01B

Oil filter cover to oil filter housing

Nm

25

Replace oil filter element

Socket wrench insert WAF 94 mm (14-point)

366 589 01 07 00

Replace oil filter element

N18.20-0252-01

1 Unscrew the oil filter cover (1) of the oil filter using the socket wrench insert and pull out of the oil filter housing together with the oil filter element (3) attached.

Allow the engine oil to flow out of the oil filter housing. Ensure that no foreign matter gets into the oil filter housing. Never wipe out the oil filter housing.

2 Unclip oil filter element (3) on oil filter cover (1).

3 Replace sealing ring (2).

Grease the new seal ring (2) lightly before installation.

4 Insert new oil filter element (3) into the oil filter cover (1).

5 Insert the oil filter cover (1) with the new oil filter element (3) into the oil filter housing and tighten, .