ap1322p1351a

Check poly-V belt for wear and damage

Typ ap · temat 13.22 · wersja 0200 · 2012-04-05

Dotyczy: ENGINE 102 in MODEL 460 /, 461.217 /219 / 227 /229 / 238 /239 / 249 /266 /267, 463.200 /204 /220 /221 / 224 /225 ENGINE 103 in MODEL 463.207 /227 /228 ENGINE 104 in MODEL 463.208 /230 /231 ENGINE 602 in MODEL 460, 461.321 /322 /323 /326 /327 /328 /329 /335 /336 /337 /338 /341 /365 /366 /367 /368 /401 /402 /403 /404 /405 /450 /451 /452 /454 /455 /456 /458 /459, 463.304 /324 /325 ENGINE 603 in MODEL 463.300 /307 /320 /321 /327 /328 ENGINE 606 in MODEL 463.308 /330 /331

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 13 Sprężarka powietrza, napędy pasowe › 13.22 Napęd jednopasowy — Seria 460 · Seria 461 (modele 217, 219, 227, 229, 238, 239, 249, 266, 267, 321, 322, 323, 326, 327, 328, 329, 335, 336, 337, 338, 341, 365, 366, 367, 368, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Seria 463 (modele 200, 204, 207, 208, 220, 221, 224, 225, 227, 228, 230, 231, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331) · Seria 602

EinPAS 15 Silnik › 15.18 Napęd paskowy › 15.18.30 Pasek/koło pasowe/koło bierne/napinacz — Seria 460 · Seria 461 (modele 217, 219, 227, 229, 238, 239, 249, 266, 267, 321, 322, 323, 326, 327, 328, 329, 335, 336, 337, 338, 341, 365, 366, 367, 368, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Seria 463 (modele 200, 204, 207, 208, 220, 221, 224, 225, 227, 228, 230, 231, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331) · Seria 602

Dotyczy też silników/skrzyń biegów: 102 ***, 103 ***, 104 ***, 603 ***, 606 ***

AP13.22-P-1351A

Check poly-V belt for wear and damage

23.3.12

ENGINE 102 in MODEL 460 /, 461.217 /219 / 227 /229 / 238 /239 / 249 /266 /267, 463.200 /204 /220 /221 / 224 /225

ENGINE 103 in MODEL 463.207 /227 /228

ENGINE 104 in MODEL 463.208 /230 /231

ENGINE 602 in MODEL 460, 461.321 /322 /323 /326 /327 /328 /329 /335 /336 /337 /338 /341 /365 /366 /367 /368 /401 /402 /403 /404 /405 /450 /451 /452 /454 /455 /456 /458 /459, 463.304 /324 /325

ENGINE 603 in MODEL 463.300 /307 /320 /321 /327 /328

ENGINE 606 in MODEL 463.308 /330 /331

Modification notes

2.3.12

Test sequence revised

Operation step 1 to 12

AP13.22-P-1351-01A

Checking

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

1

Switch off ignition

2

Mark poly-V belt on easily visible position using chalk mark

Danger!

Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

3

Check poly-V belt for wear and damage, and compare with damage profiles

To do so, crank engine with socket on crankshaft in direction of engine or crank engine gradually with starter.

AP13.22-P-1351-01A

Replace poly-V belt if necessary, subject to separate invoice.

Socket wrench bit

*001589650900

Check poly-V belt for wear and damage

001 589 65 09 00

Wrench socket

Powiązane dokumenty