AP09.10-B-0980H | Replace air filter element | 12.02.16 |
Cumbustion engine 377 with Vehicle 693.108, 693.127, 693.128, 693.144, 693.182, 693.184, 693.191, 693.195, 694.004, 694.024, 694.041, 694.047, 695.013, 695.014, 695.015, 695.016, 695.039, 695.043, 695.056, 695.301, 695.302
B09.10-0095-01
B09.10-0091-01
B09.10-0092-01
Arrows Bolts
1 Filter cover
2 Filter element
3 Sealing ring
B09.10-0093-01
B09.10-0094-01
4 Recess inside the housing (ring seating)
5 Filter element internal diameter (ring seating)
| Remove | ||
| The air filter's filter element must be replaces whenever that the maintenance indicator lamp lights or, at a maximum, after two years of use. The filter element cleaning is not recommended. | ||
1 | Release the bolts (arrows) and remove the air filter cover (1). | Clean the air filter externally. | |
2 | Remove the filter element (2). | When a safety filter element is used, it must be replaces each three replacements of the filter element, or at most every two years. | |
3 | Remove the sealing ring (3) installed in the filter housing. | Clean the housing inside without allowing dust from entering in the piping between the filter and the engine. | |
| Install | ||
4 | Install a new sealing ring (3) in the seating (4) located inside the housing | ||
5 | Install a new filter element (2). | Apply a slight layer of Vaseline in the internal diameter (5) where the sealing ring is seated. | |
For higher safety, mark the replacement date on the top of the element and write down in the maintenance manual. | |||
6 | Install the filter cover (1) and attach it with the two bolts (arrows). | Observe the sealing cover fitting. |