Dotyczy: Model 470, 471 with code ZJ7 (Model for Australia) except code EZ8 (PARKTRONIC Park Assist) except code JS1 (360° camera (SURROUND VIEW))
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.30 Części dobudowane, zabezpieczanie przed wjechaniem pod pojazd — Seria 470 · Seria 471
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.38 Zderzak/spojler/okładzina zewnętrzna/schowek/przednie zabezpieczenie › 35.38.3 Pofabryczny montaż/przebudowa — Seria 470 · Seria 471
AN88.30-S-0025-01PP
Prepare bumper body-styling bar for installation
Model
470, 471
with code ZJ7 (Model for Australia)
except code EZ8 (PARKTRONIC Park Assist)
except code JS1 (360° camera (SURROUND VIEW))
Detachable parts, body-styling bar, crossmember
Number
Designation
Model 470, 471
BA88.30-N-1011-01P
Screw, front fog lamp to body-styling bar bracket
Nm
5
Detachable parts, body-styling bar, crossmember
Number
Designation
Model 470, 471
BA88.30-N-1012-01P
Nut, radar sensor bracket to body-styling bar
Nm
8
Detachable parts, body-styling bar, crossmember
Number
Designation
Model 470, 471
BA88.30-N-1013-01P
Nut, antenna bracket to body-styling bar
Nm
50
Detachable parts, body-styling bar, crossmember
Number
Designation
Model 470, 471
BA88.30-N-1014-01P
Screw, bumper antenna to antenna bracket
Nm
5
Detachable parts, body-styling bar, crossmember
Number
Designation
Model 470, 471
BA88.30-N-1017-01P
Nut, bracket to body-styling bar
Nm
50
S88.30-A036-09
1
Install stop plugs (5).
2
Remove the air grille (3).
To do so, remove the expansion rivets (2).
3
Install the air grille (4).
To do so, use the previously removed expansion rivets (2).
S88.30-A037-09
4
Attach the radar sensor (9) to the body-styling bar (1) with nuts (11) and screws (10). .
5
Connect the electrical wiring harnesses (8) to the front fog lamps (7).
6
Attach the front fog lamp (7) to the body-styling bar (1) with screws (6). .
7
Fasten the holder (18) with screws (15), washers (16) and nuts (17) to the body-styling bar (1) .
8
Attach the bumper antenna (20) to the holder (18) with screws (19). .
9
Fasten the holder (24) with screws (21), washers (22) and nuts (23) to the body-styling bar (1) .
